Nema 14 (35mm) hollow shaft stepper motors
>> Litlhaloso Tse Khutšoane
| Mofuta oa Enjene | Bipolar stepper |
| Mohato Angle | 1.8° |
| Motlakase (V) | 1.4 / 2.9 |
| Hona joale (A) | 1.5 |
| Resistance (Ohms) | 0.95 / 1.9 |
| Inductance (mH) | 1.4 / 3.2 |
| Mehala e etellang pele | 4 |
| Ho Tšoara Torque (Nm) | 0.14 / 0.2 |
| Bolelele ba makoloi (mm) | 34/47 |
| Ambient Mocheso | -20 ℃ ~ +50 ℃ |
| Mocheso Oa Phahamisa | 80K Max. |
| Matla a Dielectric | 1mA Max.@ 500V, 1KHz, 1Sec. |
| Khanyetso ea Insulation | 100MΩ Min.@500Vdc |
>> Setifikeiti
>> Mekhahlelo ea Motlakase
| Boholo ba Motlakase | Palo ea li-volts/ Mokhahlelo (V) | Hona joale/ Mokhahlelo (A) | Khanyetso/ Mokhahlelo (Ω) | Inductance/ Mokhahlelo (mH) | Nomoro ea Mehala e etellang pele | Rotor Inertia (g.cm2) | Ho tšoara Torque (Nm) | Bolelele ba makoloi L (mm) |
| 35 | 1.4 | 1.5 | 0.95 | 1.4 | 4 | 20 | 0.14 | 34 |
| 35 | 2.9 | 1.5 | 1.9 | 3.2 | 4 | 30 | 0.2 | 47 |
>> Kakaretso tekheniki parameters
| Ho tlosoa ha mahlaseli | 0.02mm Max (450g mojaro) | Ho hanyetsa mocheso | 100MΩ @500VDC |
| Axial clearance | 0.08mm Max (450g mojaro) | Matla a dielectric | 500VAC, 1mA, 1s@1KHZ |
| Boholo ba radial load | 25N (20mm ho tloha holim'a flange) | Sehlopha sa insulation | Sehlopha sa B (80K) |
| Moroalo o moholo oa axial | 10N | Mocheso oa tikoloho | -20 ℃ ~ +50 ℃ |
>> Setšoantšo sa kemiso ea makoloi a 35HK2XX-X-4B
>> Torque-frequency curve
Boemo ba teko:
Chopper drive, ha ho ramping, halofo ea micro-steping, drive voltage 24V
About
Ha e le hantle haeba e 'ngoe ea lintho tsena e ka u khahla, ka kopo, re tsebise.Re tla thabela ho u fa khotheishene ha re fumana lintlha tse qaqileng tsa motho.Re na le lienjineri tsa rona tsa litsebi tsa R&D ho fihlela litlhokahalo life kapa life, Re labalabela ho fumana lipotso tsa hau haufinyane 'me re tšepa ho ba le monyetla oa ho sebetsa le uena nakong e tlang.Rea u amohela ho sheba mokhatlo oa rona.
Re ntse re phehella molemong oa khoebo "Boleng ba Pele, Ho Hlompha Likonteraka le ho ema ka Botumo, ho fa bareki lihlahisoa le litšebeletso tse khotsofatsang." Metsoalle ea lapeng le kantle ho naha e amoheloa ka mofuthu ho theha likamano tsa ka ho sa feleng tsa khoebo le rona.
Matsatsing ana lihlahisoa tsa rona li rekisoa hohle ka hare ho naha le kantle ho naha ka lebaka la tšehetso ea kamehla le e ncha ea bareki.Re fana ka sehlahisoa sa boleng bo holimo le theko ea tlholisano, amohela bareki ba kamehla le ba bacha ba sebelisana le rona!
Ha re tobane le matla a leqhubu la lefatše lohle la kopanyo ea moruo, re na le ts'epo ka lihlahisoa tsa rona tsa boleng bo holimo le tšebeletso e tiileng ho bareki bohle ba rona mme re lakatsa eka re ka sebelisana le uena ho theha bokamoso bo khanyang.
Khamphani ea rona e na le matla a mangata ebile e na le sistimi e tsitsitseng le e phethahetseng ea thekiso.Re lakatsa eka re ka theha likamano tse ntle tsa khoebo le bareki bohle ba tsoang lapeng le kantle ho naha motheong oa melemo e tšoanang.
Re tšepa hore re ka theha tšebelisano ea nako e telele le bareki bohle, 'me re tšepa hore re ka ntlafatsa tlhōlisano le ho finyella boemo ba win-win hammoho le bareki.Re amohela ka tieo bareki ba tsoang lefats'eng lohle ho ikopanya le rona bakeng sa eng kapa eng eo u e hlokang!Amohela bareki bohle lapeng le kantle ho naha ho etela feme ea rona.Re tšepa ho ba le likamano tsa khoebo le uena, 'me re thehe bokamoso bo betere.
