Nema 17 (42mm) stepper motor
>> Litlhaloso Tse Khutšoane
| Mofuta oa Enjene | Bipolar stepper |
| Mohato Angle | 1.8° |
| Motlakase (V) | 2.6 / 3.3 / 2 / 2.5 |
| Hona joale (A) | 1.5 / 1.5 / 2.5 / 2.5 |
| Resistance (Ohms) | 1.8 / 2.2 / 0.8 / 1 |
| Inductance (mH) | 2.6 / 4.6 / 1.8 / 2.8 |
| Mehala e etellang pele | 4 |
| Ho Tšoara Torque (Nm) | 0.25 / 0.4 / 0.5 / 0.7 |
| Bolelele ba makoloi (mm) | 34/40/48/60 |
| Ambient Mocheso | -20 ℃ ~ +50 ℃ |
| Mocheso Oa Phahamisa | 80K Max. |
| Matla a Dielectric | 1mA Max.@ 500V, 1KHz, 1Sec. |
| Khanyetso ea Insulation | 100MΩ Min.@500Vdc |
>> Setifikeiti
>> Mekhahlelo ea Motlakase
| Boholo ba Motlakase | Palo ea li-volts/ Mokhahlelo (V) | Hona joale/ Mokhahlelo (A) | Khanyetso/ Mokhahlelo (Ω) | Inductance/ Mokhahlelo (mH) | Nomoro ea Mehala e etellang pele | Rotor Inertia (g.cm2) | Ho tšoara Torque (Nm) | Bolelele ba makoloi L (mm) |
| 42 | 2.6 | 1.5 | 1.8 | 2.6 | 4 | 35 | 0.25 | 34 |
| 42 | 3.3 | 1.5 | 2.2 | 4.6 | 4 | 55 | 0.4 | 40 |
| 42 | 2 | 2.5 | 0.8 | 1.8 | 4 | 70 | 0.5 | 48 |
| 42 | 2.5 | 2.5 | 1 | 2.8 | 4 | 105 | 0.7 | 60 |
>> Kakaretso tekheniki parameters
| Ho tlosoa ha mahlaseli | 0.02mm Max (450g mojaro) | Ho hanyetsa mocheso | 100MΩ @500VDC |
| Axial clearance | 0.08mm Max (450g mojaro) | Matla a dielectric | 500VAC, 1mA, 1s@1KHZ |
| Boholo ba radial load | 25N (20mm ho tloha holim'a flange) | Sehlopha sa insulation | Sehlopha sa B (80K) |
| Moroalo o moholo oa axial | 10N | Mocheso oa tikoloho | -20 ℃ ~ +50 ℃ |
>> 42HS2XX-X-4A setšoantšo sa kemiso ea makoloi
>> Torque-frequency curve
Boemo ba teko:
Chopper drive, halofo ea micro-step, drive voltage 40V
>> Mabapi le rona
Sehlahisoa se seng le se seng se entsoe ka hloko, se tla etsa hore u khotsofale.Lihlahisoa tsa rona ts'ebetsong ea tlhahiso li behiloe leihlo ka thata, hobane ke feela ho u fa boleng bo holimo, re tla ikutloa re le sebete.Litšenyehelo tse phahameng tsa tlhahiso empa theko e tlase bakeng sa tšebelisano ea rona ea nako e telele.U ka ba le likhetho tse fapaneng mme boleng ba mefuta eohle bo ts'epahalla.Haeba u na le potso, u seke oa tsilatsila ho re botsa.
Sehlopha sa rona sa litsebi tsa boenjiniere se tla lula se ikemiselitse ho u sebeletsa bakeng sa lipuisano le maikutlo.Re boetse re khona ho u fa lisampole tsa mahala ho fihlela litlhoko tsa hau.Ho ka 'na ha etsoa boiteko bo matla ho u fa litšebeletso le thepa e nepahetseng.Bakeng sa mang kapa mang ea nahanang ka k'hamphani le thepa ea rona, ka kopo ikopanye le rona ka ho re romella mangolo-tsoibila kapa ho ikopanya le rona kapele.E le mokhoa oa ho tseba lihlahisoa tsa rona le tse tiileng.tse ling tse ngata, u ka tla fekthering ea rona ho tla tseba.Re tla lula re amohela baeti ba tsoang lefats'eng lohle ho tla khoebong ea rona ho theha likamano tsa khampani le rona.Ka kopo, ikutloe u lokolohile ho ikopanya le rona bakeng sa khoebo mme re lumela hore re tla arolelana boiphihlelo bo holimo ba khoebo le barekisi bohle ba rona.