Nema 14 (35mm) e koetsoeng-loop stepper motors
>> Litlhaloso Tse Khutšoane
| Mofuta oa Enjene | Bipolar stepper |
| Mohato Angle | 1.8° |
| Motlakase (V) | 1.8 / 2.9 |
| Hona joale (A) | 1.5 |
| Resistance (Ohms) | 1.23 / 1.9 |
| Inductance (mH) | 1.4 / 3.2 |
| Mehala e etellang pele | 4 |
| Ho Tšoara Torque (Nm) | 0.14 / 0.2 |
| Bolelele ba makoloi (mm) | 34/47 |
| Encoder | 1000CPR |
| Ambient Mocheso | -20 ℃ ~ +50 ℃ |
| Mocheso Oa Phahamisa | 80K Max. |
| Matla a Dielectric | 1mA Max.@ 500V, 1KHz, 1Sec. |
| Khanyetso ea Insulation | 100MΩ Min.@500Vdc |
>> Setifikeiti
>> Mekhahlelo ea Motlakase
| Boholo ba Motlakase | Palo ea li-volts /Mohato (V) | Hona joale /Mohato (A) | Khanyetso /Mohato (Ω) | Inductance /Mohato (mH) | Nomoro ea Mehala e etellang pele | Rotor Inertia (g.cm2) | Ho tšoara Torque (Nm) | Bolelele ba makoloi L (mm) |
| 35 | 1.8 | 1.5 | 1.23 | 1.4 | 4 | 20 | 0.14 | 34 |
| 35 | 2.9 | 1.5 | 1.9 | 3.2 | 4 | 30 | 0.2 | 47 |
>> Kakaretso tekheniki parameters
| Ho tlosoa ha mahlaseli | 0.02mm Max (450g mojaro) | Ho hanyetsa mocheso | 100MΩ @500VDC |
| Axial clearance | 0.08mm Max (450g mojaro) | Matla a dielectric | 500VAC, 1mA, 1s@1KHZ |
| Boholo ba radial load | 25N (20mm ho tloha holim'a flange) | Sehlopha sa insulation | Sehlopha sa B (80K) |
| Moroalo o moholo oa axial | 10N | Mocheso oa tikoloho | -20 ℃ ~ +50 ℃ |
>> 35IHS2XX-1.5-4A setšoantšo sa kemiso ea makoloi
| Tlhophiso ea Pin (Phapang) | ||
| Pin | Tlhaloso | Mmala |
| 1 | GND | Ntsho |
| 2 | Vcc | Khubedu |
| 3 | Ch A+ | Botala |
| 4 | Ch A- | Brown |
| 5 | Ch B- | Hlooho |
| 6 | Ch B+ | Bosoeu |
| Tlhophiso ea Pin (Phapang) | ||
| Pin | Tlhaloso | Mmala |
| 1 | GND | Ntsho |
| 2 | Vcc | Khubedu |
| 3 | Ch A+ | Botala |
| 4 | Ch A- | Brown |
| 5 | Ch B- | Hlooho |
| 6 | Ch B+ | Bosoeu |
| 7 | Ch Z+ | Bosehla |
| 8 | Ch Z- | namunu |
>> Mabapi le rona
Thinker Motion ke mofani ea hlahelletseng le ea nchafalitsoeng oa tharollo ea metsamao.Khampani e fetile setifikeiti sa ISO9001, lihlahisoa tsa eona li fetile RoHS le CE, 'me e na le litokelo tsa lihlahisoa tse 22.
Kamehla re beha litlhoko tsa bareki ba rona e le tsona tse tlang pele 'me re ikemiselitse ho fa bareki ba rona lihlahisoa le litšebeletso tsa boleng bo holimo.Hona joale re sebeletsa bareki ba ka bang 600.
Re na le lisebelisoa tse 8 tsa CNC, mochini o silang oa 1 CNC, mochini o le mong o sehang oa terata, le lisebelisoa tse ling tsa machining.Re khona ho etsa likarolo tse ngata tse sa tloaelehang re le bang ka tlung ho khutsufatsa nako ea pele ea lihlahisoa tse ikhethileng, le ho fa bareki ba rona boiphihlelo bo botle ba ho reka.Hangata, nako ea pele ea lihlahisoa tsa rona tsa lead screw motor e ka hare ho beke e le 1, 'me nako ea ho etella pele ea "ball screw" ke matsatsi a ka bang 10.
