Nema 17 (42mm) e koetsoeng-loop stepper motors
>> Litlhaloso Tse Khutšoane
| Mofuta oa Enjene | Bipolar stepper |
| Mohato Angle | 1.8° |
| Motlakase (V) | 2 / 2.5 |
| Hona joale (A) | 2.5 / 2.5 |
| Resistance (Ohms) | 0.8 / 1 |
| Inductance (mH) | 1.8 / 2.8 |
| Mehala e etellang pele | 4 |
| Ho Tšoara Torque (Nm) | 0.5 / 0.6 |
| Bolelele ba makoloi (mm) | 48/60 |
| Encoder | 1000CPR |
| Ambient Mocheso | -20 ℃ ~ +50 ℃ |
| Mocheso Oa Phahamisa | 80K Max. |
| Matla a Dielectric | 1mA Max.@ 500V, 1KHz, 1Sec. |
| Khanyetso ea Insulation | 100MΩ Min.@500Vdc |
>> Setifikeiti
>> Mekhahlelo ea Motlakase
| Boholo ba Motlakase | Palo ea li-volts/ Mokhahlelo (V) | Hona joale/ Mokhahlelo (A) | Khanyetso/ Mokhahlelo (Ω) | Inductance/ Mokhahlelo (mH) | Nomoro ea Mehala e etellang pele | Rotor Inertia (g.cm2) | Ho tšoara Torque (Nm) | Bolelele ba makoloi L (mm) |
| 42 | 2 | 2.5 | 0.8 | 1.8 | 4 | 70 | 0.5 | 48 |
| 42 | 2.5 | 2.5 | 1 | 2.8 | 4 | 105 | 0.6 | 60 |
>> Kakaretso tekheniki parameters
| Ho tlosoa ha mahlaseli | 0.02mm Max (450g mojaro) | Ho hanyetsa mocheso | 100MΩ @500VDC |
| Axial clearance | 0.08mm Max (450g mojaro) | Matla a dielectric | 500VAC, 1mA, 1s@1KHZ |
| Boholo ba radial load | 25N (20mm ho tloha holim'a flange) | Sehlopha sa insulation | Sehlopha sa B (80K) |
| Moroalo o moholo oa axial | 10N | Mocheso oa tikoloho | -20 ℃ ~ +50 ℃ |
>> 42IHS2XX-2.5-4A setšoantšo sa kemiso ea makoloi
| Tlhophiso ea Pin (Phapang) | ||
| Pin | Tlhaloso | Mmala |
| 1 | +5V | Khubedu |
| 2 | GND | Bosoeu |
| 3 | A+ | Ntsho |
| 4 | A- | Boputsoa |
| 5 | B+ | Bosehla |
| 6 | B- | Botala |
>> Boemo ba Khampani
Lihlahisoa tsa rona tse tsamaeang ka mela li sebelisoa haholo lisebelisoa tsa bongaka, lisebelisoa tsa laboratori, likhokahano, li-semiconductors, li-automation le lits'ebetso tse ling tse hlokang motsamao o nepahetseng oa mela.
Lihlahisoa tsa rona li koahela likarolo tsa ACME lead screw nut, ACME lead screw stepping motors, ball screw stepping motors, rotary stepping motors, hollow shaft stepping motors, cloping-loop stepping motors, gearbox deceleration stepping motors, hammoho le li-module tse fapaneng le motsamao o ikhethileng. lihlahisoa.
Re lumela hore batho ke mehloli ea bohlokoa ka ho fetisisa ea k'hamphani, 'me ba khomarela molao-motheo o shebaneng le batho, ho fa basebetsi sebaka se sireletsehileng, se phetseng hantle, se nang le boiketlo ba ho sebetsa, le ho etsa hore ba atlehe hammoho le khampani.
