Nema 8 (20mm) e koetsoeng-loop stepper motors
>> Litlhaloso Tse Khutšoane
| Mofuta oa Enjene | Bipolar stepper |
| Mohato Angle | 1.8° |
| Motlakase (V) | 2.5 / 4.3 |
| Hona joale (A) | 0.5 |
| Resistance (Ohms) | 4.9 / 8.6 |
| Inductance (mH) | 1.5 / 3.5 |
| Mehala e etellang pele | 4 |
| Ho Tšoara Torque (Nm) | 0.015 / 0.03 |
| Bolelele ba makoloi (mm) | 30/42 |
| Encoder | 1000CPR |
| Ambient Mocheso | -20 ℃ ~ +50 ℃ |
| Mocheso Oa Phahamisa | 80K Max. |
| Matla a Dielectric | 1mA Max.@ 500V, 1KHz, 1Sec. |
| Khanyetso ea Insulation | 100MΩ Min.@500Vdc |
>> Setifikeiti
>> Mekhahlelo ea Motlakase
| Boholo ba Motlakase | Palo ea li-volts/ Mokhahlelo (V) | Hona joale/ Mokhahlelo (A) | Khanyetso/ Mokhahlelo (Ω) | Inductance/ Mokhahlelo (mH) | Nomoro ea Mehala e etellang pele | Rotor Inertia (g.cm2) | Ho tšoara Torque (Nm) | Bolelele ba makoloi L (mm) |
| 20 | 2.5 | 0.5 | 4.9 | 1.5 | 4 | 2 | 0.015 | 30 |
| 20 | 4.3 | 0.5 | 8.6 | 3.5 | 4 | 3.6 | 0.03 | 42 |
>> Kakaretso tekheniki parameters
| Ho tlosoa ha mahlaseli | 0.02mm Max (450g mojaro) | Ho hanyetsa mocheso | 100MΩ @500VDC |
| Axial clearance | 0.08mm Max (450g mojaro) | Matla a dielectric | 500VAC, 1mA, 1s@1KHZ |
| Boholo ba radial load | 15N (20mm ho tloha holim'a flange) | Sehlopha sa insulation | Sehlopha sa B (80K) |
| Moroalo o moholo oa axial | 5N | Mocheso oa tikoloho | -20 ℃ ~ +50 ℃ |
>> 20IHS2XX-0.5-4A setšoantšo sa kemiso ea makoloi
| Tlhophiso ea phini (Qetellong e le 'ngoe) | ||
| Pin | Tlhaloso | Mmala |
| 1 | GND | Ntsho |
| 2 | Ch A+ | Bosoeu |
| 3 | N/A | Bosoeu/Botsho |
| 4 | Vcc | Khubedu |
| 5 | Ch B+ | Bosehla |
| 6 | N/A | Bosehla/Botsho |
| 7 | Ch I+ | Brown |
| 8 | N/A | Bosootho/Botsho |
| Tlhophiso ea Pin (Phapang) | ||
| Pin | Tlhaloso | Mmala |
| 1 | GND | Ntsho |
| 2 | Ch A+ | Bosoeu |
| 3 | Ch A- | Bosoeu/Botsho |
| 4 | Vcc | Khubedu |
| 5 | Ch B+ | Bosehla |
| 6 | Ch B- | Bosehla/Botsho |
| 7 | Ch I+ | Brown |
| 8 | Ch I- | Bosootho/Botsho |
>> Mabapi le rona
E le hore u tsebe ho sebelisa lisebelisoa tse tsoang boitsebisong bo ntseng bo hola khoebong ea machaba, re amohela bareki ba tsoang hohle inthaneteng le kantle ho marang-rang.Leha ho na le litharollo tsa boleng bo holimo tseo re fanang ka tsona, ts'ebeletso e sebetsang le e khotsofatsang ea lipuisano e fanoa ke sehlopha sa rona sa litsebi ka mor'a thekiso.Manane a lihlahisoa le lintlha tse qaqileng le lintlha life kapa life tse ling tse tla romelloa ho uena ka nako bakeng sa lipotso tsa hau.Kahoo ka kopo ikopanye le rona ka ho re romella mangolo-tsoibila kapa u re letsetse haeba u na le lipotso mabapi le mokhatlo oa rona.o kanna oa fumana lintlha tsa aterese ea rona leqepheng la sebaka sa marang-rang mme oa tla k'hamphaning ea rona ho tla fumana tlhahlobo ea thepa ea rona.Re na le ts'epo ea hore re tla arolelana katleho e tšoanang le ho theha likamano tse matla tsa tšebelisano-'moho le balekane ba rona 'marakeng ona.Re ntse re batlana le lipotso tsa hau.
